WaveWare Apollo T-2000 Informacje Techniczne Pobierz pdf (Strona 36)

Certification Manual

- 36 -

the primary features that Alliance uses in the Concord Panel. It will also

provide specs for reference purposes. For more extensive information

please refer to the manufacturer’s literature in the Appendices.

Concord 4 Panels

GE offers several different variations of

the Concord Panel. The two that Alliance

specifies, the 4 and the Ultra, will be

discussed here. The Concord 4 Control Panel

is a commercial burglary panel that supports

up to 96 wireless zones and 8 hardwired

zones without add-on modules. The panel

has a built in wireless receiver with a rated

range of 1000’. The panel can support up to 16 bus devices and is

enclosed in a metal can. The superbus communication line consists of a

four wire bus line that is typically run on CAT5e cable. For particularly long

wire runs, more than 1000’ use non-shielded stranded core 18/4 cable. The

four conductors of the bus line are positive 12VDC, Bus A, Bus B and

negative 12VDC. The Concord 4 is capable of supporting a total of 1 amp

of current draw on the bus line without using a booster power supply.

The Concord Panel handles all of the wireless zone call data as it

streams through the system. In brief, the wireless transmitters, located in

the call stations, send a signal, when tripped, to the transceivers, or the

concord panel itself. That signal is then sent out on the bus line where the

control panel is able to handle it and pass it on through the automation

module to the server computer.

Alliance specifies that this device be powered by a 16.5VAC plug in

power supply. The outlet must be a dedicated generator backup circuit of

20 amps. Typically this unit should be mounted in a mechanical room, or

other utility room where the temperature does not rise above 90º F. It is

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 113 114

Brak uwag

WaveWare Apollo T-2000 Informacje Techniczne Strona 36